Différences

Ci-dessous, les différences entre deux révisions de la page.

@@ Ligne 1: / Ligne 1: @@
+====Configuration pour des voies Transpondeur ou des links====
+Chaque logique est démarrée par la ligne:**LOGICS=RepeaterLogic,IntercomLogic**
+On retrouve ensuite les configurations des récepteurs dans Rx1,Rx2 ainsi que les configurations des émetteurs Tx1,Tx2
+Nous allons dans un premier temps, créer le fichier IntercomLogic.tcl
+Se rendre dans le bon répertoire:
+**cd /usr/share/svxlink/events.d/**
+Nous allons dupliquer le fichier SimplexLogic.tcl en IntercomLogic.tcl
+**sudo cp SimplexLogic.tcl IntercomLogic.tcl**
+taper **ls** pour verifier la création du fichier et l’orthographe correcte.
+Editons le fichier IntercomLogic.tcl
+**sudo nano IntercomLogic.tcl**
+Il suffit  de modifier le nom de namespace: namespace eval IntercomLogic (ligne 12)
+<note> Au dela de **3 voies** le Raspberry commence à avoir des limites hardware, le son est fortement dégradé.</note>
+Edite le fichier svxlink.conf et modifier comme l'exemple **sudo nano /etc/svxlink/svxlink.conf**
+<code python | svxlink.conf>
+###############################################################################
+#                                                                             #
+#                Configuration file for the SvxLink server                    #
+#                                                                             #
+###############################################################################
+[GLOBAL]
+#MODULE_PATH=/usr/lib/arm-linux-gnueabihf/svxlink
+LOGICS=RepeaterLogic,IntercomLogic
+CFG_DIR=svxlink.d
+TIMESTAMP_FORMAT="%c"
+CARD_SAMPLE_RATE=16000
+#CARD_CHANNELS=1
+#LOCATION_INFO=LocationInfo
+LINKS=IntercomLink
+[RepeaterLogic]
+TYPE=Repeater
+RX=Rx1
+TX=Tx1
+#MODULES=ModuleHelp,ModuleParrot,ModuleEchoLink,ModuleTclVoiceMail
+MODULES=ModuleHelp,ModuleParrot
+CALLSIGN=F1ZKA
+SHORT_IDENT_INTERVAL=15
+LONG_IDENT_INTERVAL=60
+#IDENT_ONLY_AFTER_TX=4
+#EXEC_CMD_ON_SQL_CLOSE=500
+EVENT_HANDLER=/usr/share/svxlink/events.tcl
+DEFAULT_LANG=fr_FR
+RGR_SOUND_DELAY=0
+REPORT_CTCSS=136.5
+#TX_CTCSS=SQL_OPEN
+MACROS=Macros
+#SEL5_MACRO_RANGE=03400,03499
+FX_GAIN_NORMAL=0
+FX_GAIN_LOW=-12
+#QSO_RECORDER=8:QsoRecorder
+#NO_REPEAT
+IDLE_TIMEOUT=15
+OPEN_ON_1750=500
+#OPEN_ON_CTCSS=136:2000
+#OPEN_ON_DTMF=*
+#OPEN_ON_SQL=5000
+#OPEN_ON_SEL5=01234
+#OPEN_SQL_FLANK=OPEN
+#OPEN_ON_SQL_AFTER_RPT_CLOSE=10
+IDLE_SOUND_INTERVAL=3000
+#SQL_FLAP_SUP_MIN_TIME=1000
+#SQL_FLAP_SUP_MAX_COUNT=10
+#ACTIVATE_MODULE_ON_LONG_CMD=4:EchoLink
+#IDENT_NAG_TIMEOUT=15
+#IDENT_NAG_MIN_TIME=2000
+#ONLINE_CMD=998877
+#STATE_PTY=/var/run/svxlink/state
+[IntercomLogic]
+TYPE=Simplex
+RX=Rx2
+TX=Tx2
+MODULES=ModuleHelp,ModuleMetarInfo,ModuleParrot
+CALLSIGN=F5XYZ
+SHORT_IDENT_INTERVAL=15
+LONG_IDENT_INTERVAL=60
+EVENT_HANDLER=/usr/share/svxlink/events.tcl
+DEFAULT_LANG=fr_FR
+RGR_SOUND_DELAY=0
+MACROS=Macros
+FX_GAIN_NORMAL=0
+FX_GAIN_LOW=-12
+ONLINE_CMD=123456789
+#MUTE_RX_ON_TX=1
+#MUTE_TX_ON_RX=1
+[IntercomLink]
+CONNECT_LOGICS=RepeaterLogic,IntercomLogic:99
+DEFAULT_ACTIVE=1
+[Macros]
+=EchoLink:9999#
+=Parrot:0123456789#
+=EchoLink:9999#
+[QsoRecorder]
+REC_DIR=/var/spool/svxlink/qso_recorder
+#MIN_TIME=1000
+MAX_TIME=3600
+SOFT_TIME=300
+MAX_DIRSIZE=1024
+#DEFAULT_ACTIVE=1
+#TIMEOUT=300
+#QSO_TIMEOUT=300
+#ENCODER_CMD=/usr/bin/oggenc -Q \"%f\" && rm \"%f\"
+[Voter]
+TYPE=Voter
+RECEIVERS=Rx1,Rx2,Rx3
+VOTING_DELAY=200
+BUFFER_LENGTH=0
+#REVOTE_INTERVAL=1000
+#HYSTERESIS=50
+#SQL_CLOSE_REVOTE_DELAY=500
+#RX_SWITCH_DELAY=500
+[MultiTx]
+TYPE=Multi
+TRANSMITTERS=Tx1,Tx2,Tx3
+[NetRx]
+TYPE=Net
+HOST=remote.rx.host
+TCP_PORT=5210
+#LOG_DISCONNECTS_ONCE=0
+AUTH_KEY="Change this key now!"
+CODEC=S16
+#SPEEX_ENC_FRAMES_PER_PACKET=4
+#SPEEX_ENC_QUALITY=4
+#SPEEX_ENC_BITRATE=15000
+#SPEEX_ENC_COMPLEXITY=2
+#SPEEX_ENC_VBR=0
+#SPEEX_ENC_VBR_QUALITY=4
+#SPEEX_ENC_ABR=15000
+#SPEEX_DEC_ENHANCER=1
+#OPUS_ENC_FRAME_SIZE=20
+#OPUS_ENC_COMPLEXITY=10
+#OPUS_ENC_BITRATE=20000
+#OPUS_ENC_VBR=1
+[NetTx]
+TYPE=Net
+HOST=remote.tx.host
+TCP_PORT=5210
+#LOG_DISCONNECTS_ONCE=0
+AUTH_KEY="Change this key now!"
+CODEC=S16
+#SPEEX_ENC_FRAMES_PER_PACKET=4
+#SPEEX_ENC_QUALITY=4
+#SPEEX_ENC_BITRATE=15000
+#SPEEX_ENC_COMPLEXITY=2
+#SPEEX_ENC_VBR=0
+#SPEEX_ENC_VBR_QUALITY=4
+#SPEEX_ENC_ABR=15000
+#SPEEX_DEC_ENHANCER=1
+#OPUS_ENC_FRAME_SIZE=20
+#OPUS_ENC_COMPLEXITY=10
+#OPUS_ENC_BITRATE=20000
+#OPUS_ENC_VBR=1
+[Rx1]
+TYPE=Local
+AUDIO_DEV=alsa:plughw:1
+AUDIO_CHANNEL=0
+SQL_DET=GPIO
+SQL_START_DELAY=0
+SQL_DELAY=0
+SQL_HANGTIME=0
+#SQL_EXTENDED_HANGTIME=1000
+#SQL_EXTENDED_HANGTIME_THRESH=15
+#SQL_TIMEOUT=600
+#VOX_FILTER_DEPTH=20
+#VOX_THRESH=1000
+#CTCSS_MODE=2
+#CTCSS_FQ=136.5
+#CTCSS_SNR_OFFSET=0
+#CTCSS_OPEN_THRESH=15
+#CTCSS_CLOSE_THRESH=9
+#CTCSS_BPF_LOW=60
+#CTCSS_BPF_HIGH=270
+#SERIAL_PORT=/dev/ttyS0
+#SERIAL_PIN=CTS
+#SERIAL_SET_PINS=DTR!RTS
+#EVDEV_DEVNAME=/dev/input/by-id/usb-SYNIC_SYNIC_Wireless_Audio-event-if03
+#EVDEV_OPEN=1,163,1
+#EVDEV_CLOSE=1,163,0
+GPIO_SQL_PIN=gpio19
+#PTY_PATH=/tmp/rx1_sql
+#HID_DEVICE=/dev/hidraw3
+#HID_SQL_PIN=VOL_UP
+#SIGLEV_DET=TONE
+SIGLEV_SLOPE=1
+SIGLEV_OFFSET=0
+#SIGLEV_BOGUS_THRESH=120
+#TONE_SIGLEV_MAP=100,84,60,50,37,32,28,23,19,8
+SIGLEV_OPEN_THRESH=30
+SIGLEV_CLOSE_THRESH=10
+DEEMPHASIS=0
+#SQL_TAIL_ELIM=300
+#PREAMP=6
+PEAK_METER=1
+DTMF_DEC_TYPE=INTERNAL
+DTMF_MUTING=1
+DTMF_HANGTIME=100
+DTMF_SERIAL=/dev/ttyS0
+#DTMF_PTY=/tmp/rx1_dtmf
+#DTMF_MAX_FWD_TWIST=8
+#DTMF_MAX_REV_TWIST=4
+_MUTING=1
+#SEL5_DEC_TYPE=INTERNAL
+#SEL5_TYPE=ZVEI1
+#FQ=433475000
+#MODULATION=FM
+#WBRX=WbRx1
+[WbRx1]
+#TYPE=RtlUsb
+#DEV_MATCH=0
+#HOST=localhost
+#PORT=1234
+#CENTER_FQ=435075000
+#FQ_CORR=0
+#GAIN=0
+#PEAK_METER=1
+#SAMPLE_RATE=960000
+[Tx1]
+TYPE=Local
+AUDIO_DEV=alsa:plughw:1
+#AUDIO_DEV=alsa:plug:plugequal
+AUDIO_CHANNEL=0
+PTT_TYPE=GPIO
+#PTT_PORT=/dev/ttyS0
+PTT_PIN=gpio16
+#HID_DEVICE=/dev/hidraw3
+#HID_PTT_PIN=GPIO3
+#SERIAL_SET_PINS=DTR!RTS
+#PTT_HANGTIME=1000
+TIMEOUT=300
+TX_DELAY=10
+#CTCSS_FQ=136.5
+#CTCSS_LEVEL=9
+PREEMPHASIS=0
+DTMF_TONE_LENGTH=100
+DTMF_TONE_SPACING=50
+DTMF_DIGIT_PWR=-15
+#MASTER_GAIN=0.0
+[Rx2]
+TYPE=Local
+AUDIO_DEV=alsa:plughw:1
+AUDIO_CHANNEL=0
+SQL_DET=GPIO
+GPIO_SQL_PIN=gpio18
+SQL_START_DELAY=60
+SQL_DELAY=0
+SQL_HANGTIME=2000
+SQL_TIMEOUT=300
+DEEMPHASIS=0
+#SQL_TAIL_ELIM=0
+PREAMP=0
+PEAK_METER=1
+DTMF_DEC_TYPE=INTERNAL
+DTMF_MUTING=1
+DTMF_HANGTIME=100
+#1750_MUTING=0
+[Tx2]
+TYPE=Local
+AUDIO_DEV=alsa:plughw:1
+AUDIO_CHANNEL=0
+PTT_TYPE=GPIO
+PTT_PIN=gpio17
+#PTT_HANGTIME=1000
+TIMEOUT=600
+TX_DELAY=10
+PREEMPHASIS=0
+DTMF_TONE_LENGTH=100
+DTMF_TONE_SPACING=50
+DTMF_DIGIT_PWR=-15
+[LocationInfo]
+APRS_SERVER_LIST=euro.aprs2.net:14580
+#STATUS_SERVER_LIST=aprs.echolink.org:5199
+#LON_POSITION=12.10.00E
+#LAT_POSITION=51.10.00N
+#CALLSIGN=EL-DL0ABC
+#FREQUENCY=438.875
+#TX_POWER=8
+#ANTENNA_GAIN=6
+#ANTENNA_HEIGHT=20m
+#ANTENNA_DIR=-1
+PATH=WIDE1-1
+BEACON_INTERVAL=10
+#TONE=136
+COMMENT=SvxLink by SM0SVX (svxlink.sourceforge.net)
+</code>
+Retrouvez un article complémentaire sur le site F8ASB.COM http://blog.f8asb.com/2017/09/23/svxlink-vers-une-solution-intercom-1ere-partie/