====  WeeWx Installation====
In first it's necessary make update and upgrade:

<code bash>
sudo apt-get update && sudo apt-get -y upgrade
</code>

# Need packages : 
<code bash>
sudo apt-get install python-configobj
sudo apt-get install python-cheetah
sudo apt-get install python-imaging
</code>

# Need package only if you use serial port or USB:
<code bash>
sudo apt-get install python-serial 
sudo apt-get install python-usb
</code>

# Need package only if you use MySQL:
<code bash>
sudo apt-get install mysql-client
sudo apt-get install python-mysqldb
</code>
# Need package only if you use FTP:
<code bash>
sudo apt-get install ftp
</code>

Write every line begin with sudo or write only a line like this:
<code bash>
sudo apt-get install python-configobj python-cheetah python-imaging python-serial python-usb
</code>

Download Weexw file, to obtain good number version go to [[http://weewx.com/downloads/|download page]]
write:
<code bash>
sudo wget weewx.com/downloads/weewx-X.Y.Z.tar.gz
</code>
We will decompress the file (replace version number weewx-X.Y.Z by curent version )
Following lines are with the version of May-09-2016

<code bash>
sudo tar xvfz weewx-3.5.0.tar.gz 
</code>
go to directory and decompress:
<code bash>
cd weewx-3.5.0
</code>
Install software
<code bash>
./setup.py build
</code>
and
<code bash>
sudo ./setup.py install
</code>

Answer the questions:

description: Station météo WS1080
altitude: 315, meter
latitude:  (valeur en decimal)
longitude: (valeur en decimal)
units [metric]: faire entrée

Installed drivers include:

0) AcuRite         (weewx.drivers.acurite)

1) CC3000          (weewx.drivers.cc3000)

2) FineOffsetUSB   (weewx.drivers.fousb)

3) Simulator       (weewx.drivers.simulator)

4) TE923           (weewx.drivers.te923)

5) Ultimeter       (weewx.drivers.ultimeter)

6) Vantage         (weewx.drivers.vantage)

7) WMR100          (weewx.drivers.wmr100)

8) WMR200          (weewx.drivers.wmr200)

9) WMR9x8          (weewx.drivers.wmr9x8)

10) WS1             (weewx.drivers.ws1)

11) WS23xx          (weewx.drivers.ws23xx)

12) WS28xx          (weewx.drivers.ws28xx)

choose a driver: 2 (for me) weather station is Conrad WS1080

All parameter are entered

For launch configuration:
<code bash>
/home/weewx/bin/wee_config --reconfigure --driver=weewx.drivers.vantage
</code>

Edit conf file:
<code bash>
sudo nano /home/pi/weewx-3.5.0/weewx.conf
</code>

change model if you need
<code bash>
# The station model, e.g., WH1080, WS1090, WS2080, WH3081
    model = WS1080
</code>

Change the target_unit
<code bash>
target_unit = METRIC 
</code>

**CTRL X** to Quit

Software is installed to verify if your weather station answer write the followed command:
<code bash>
sudo /home/pi/weewx-3.5.0/bin/wee_device
</code>

Editer  wee_device to remove header lines.

<code bash>
sudo nano /home/pi/weewx-3.5.0/bin/wee_device
</code>

add # before followed lines
<code bash>
#    print 'Using configuration file %s' % config_fn

</code>
and
<code bash>
#       print 'Using %s driver version %s (%s)' % (
 #           driver_name, driver_vers, driver)
</code>

This command give live data weather report
<code bash>
sudo /home/pi/weewx-3.5.0/bin/wee_device --current
</code>
==== Modification of Logic.tcl ====
Edit Logic.tcl and add following lines:

<code bash>
sudo nano /usr/share/svxlink/events.d/local/Logic.tcl
</code>
<code bash>
#SEND DTMF CODE 25#
#WEATHER STATION WITH WEEWX
  if {$cmd == "25"} {   
#ASK DATA
  playMsg "SVXCard/Weatherstation" "weatherinfo"
  set runcmd [exec /home/pi/weewx-3.5.0/bin/wee_device --current];  #ask weather datas
  set splitip [split $runcmd ,]

lassign $splitip status delay outTempBatteryStatus outTemp outHumidity UV radiation rain dateTime windDir pressure windSpeed inHum$

#puts $status
#puts $delay
#puts $outTempBatteryStatus

#TEMPERATURE OUT
puts $outTemp
set outTemp [lindex $outTemp 1]

if {$outTemp != "None"} {

 set outTemp [format {%0.1f} [expr $outTemp]]
playMsg "SVXCard/Weatherstation" "tempext";
playTemp $outTemp;

} else {

 puts "Temperature exterieur non disponible"
playMsg "SVXCard/Weatherstation" "tempext";
playMsg "SVXCard/Weatherstation" "noavailable";
}
#HUMIDITY OUT
puts $outHumidity
set outHumidity [lindex $outHumidity 1]
if {$outHumidity != "None"} {

playMsg "SVXCard/Weatherstation" "humidityout";
playNumber $outHumidity;
playMsg "Default" "percent";
} else {

 puts "Humidité exterieur non disponible"
playMsg "SVXCard/Weatherstation" "humidityext";
playMsg "SVXCard/Weatherstation" "noavailable";
}
#puts $UV
#puts $radiation
puts $rain
#puts $dateTime

#WIND DIRECTION
puts $windDir
set windDir [lindex $windDir 1]

playMsg "SVXCard/Weatherstation" "winddir";
playWindDir $windDir

#WINDSPEED
puts $windSpeed
set windSpeed [lindex $windSpeed 1]
if {$windSpeed != "None"} {

playMsg "SVXCard/Weatherstation" "windspeed";

set windSpeed [format {%0.1f} [expr $windSpeed]]
playNumber $windSpeed;
playMsg "SVXCard/Weatherstation" "kmh";
} else {


 puts "Wind speed not available"
}

#PRESSURE
puts $pressure
set pressure [lindex $pressure 1]
HUMIDITY OUT
puts $outHumidity
set outHumidity [lindex $outHumidity 1]
if {$outHumidity != "None"} {

playMsg "SVXCard/Weatherstation" "humidityout";
playNumber $outHumidity;
playMsg "Default" "percent";
} else {

 puts "Humidity exterior not available"
playMsg "SVXCard/Weatherstation" "humidityext";
playMsg "SVXCard/Weatherstation" "noavailable";
}
#puts $UV
#puts $radiation
puts $rain
#puts $dateTime

#WIND DIRECTION
puts $windDir
set windDir [lindex $windDir 1]

playMsg "SVXCard/Weatherstation" "winddir";
playWindDir $windDir

#WINDSPEED
puts $windSpeed
set windSpeed [lindex $windSpeed 1]
if {$windSpeed != "None"} {

playMsg "SVXCard/Weatherstation" "windspeed";

set windSpeed [format {%0.1f} [expr $windSpeed]]
playNumber $windSpeed;
playMsg "SVXCard/Weatherstation" "kmh";
} else {


 puts "Wind speed not available"
}

#PRESSURE
puts $pressure
set pressure [lindex $pressure 1]
set pressure [format {%0.1f} [expr $pressure]]
playMsg "SVXCard/Weatherstation" "pressure";
playNumber $pressure;
playMsg "SVXCard/Weatherstation" "hpa";

# TEMPERATURE IN 
puts $inTemp
set inTemp [lindex $inTemp 1]
set inTemp [format {%0.1f} [expr $inTemp]]

playMsg "SVXCard/Weatherstation" "tempint";
playTemp $inTemp;

# HUMINIDY IN
puts $inHumidity
set inHumidity [lindex $inHumidity 1]
playMsg "SVXCard/Weatherstation" "humidityin";
playNumber $inHumidity;
playMsg "Default" "percent";

#puts $rxCheckPercent
puts $windGust
puts $rainTotal

#puts $ptr
#puts $usUnits
#WIND GUST DIRECTION

puts $windGustDir
set windDir [lindex $windGustDir 1]

playWindDir $windGustDir

    return 1
  }

</code>

Its necessary add a locale.tcl file in events.d directory in language file. (fr_FR/events.d/locale.tcl) available [[https://github.com/F8ASB/fr_FR_Agnes/blob/master/events.d/locale.tcl/| here]], this file is modified to speak good as possible and integred function to read wind direction and other small modification (no tested with English language for the moment).

{{youtube>3OgZJOwSX60?medium}}