Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Installation of Raspbian Jessie (Debian 8) on a micro-SD Card ====== {{ :fr:micro-sd-card-8gb-class-10.jpg?nolink&100|}}A fast microSD is recommended (classe 10). ====== First Login for Raspberry Pi settings ====== ===== Connexion ===== Two ways to defined the IP address of the raspberry: - by consulting the list of IP addresses connected to your router (or Internet box) - by the sniffing of your Ethernet network with a specific software (exemple [[http://www.advanced-ip-scanner.com/fr/|Advanced IP Scanner]]]) Logon with a terminal emulation software like [[http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html\Putty]] <code bash> login : pi password : raspberry </code> ===== Update and configuration ===== Login as root <code bash> sudo su </code> Execute an update the operating system <code bash> apt-get update && apt-get upgrade </code> Run the command to configure the Raspberry Pi <code bash> raspi-config </code> <code bash> Expand Filesystem </code> <code bash> Enable SPI </code> <code bash> Enable I2C </code> <code bash> Enable Serial </code> {{ :documents:raspi-config.gif?nolink |}} ==== Adjust Date/Time==== If you want that the beacons of your repeater are broadcasting in local time, do not forget to setup the Time Zone with the utility ''raspi-config'' : ''Menu Internationalisations Options'', and ''Change Timezone'' Next after the setting of the time zone of Paris, you will see this confirmation message: <code> Current default time zone: 'Europe/Paris' Local time is now: Mon Jan 18 00:00:43 CET 2016. Universal Time is now: Sun Jan 17 23:00:43 UTC 2016. </code> en/installation_debian_8_jessy_raspberry_pi_2.txt Last modified: 2020/07/05 17:13(external edit)